MADE TO ORDER - SPENCER – STREET MESH MOTORCYCLE RIDING JACKET

Things to keep in mind to ensure the measurements are taken correctly
- It will be helpful to have a family member or a friend take the measurements
- Please use flexible tape only, like a tailor’s tape
- All the measurements must be in the same units, whether cm or inches
- You should preferably be wearing base layers while taking measurements, and avoid anything bulky

STEP 1 - Measure using a tailor's tape
There are two key measurements that you need to take into consideration for figuring out your jacket size.
A) Chest - Wrap the tape measure around the widest part of the chest and do not inhale while taking the measurement. Tape measure over your chest should be comfortable i.e. not too tight or loose. Keep your arms loose on the sides, and breathe in normally.
B) Waist - Measure the circumference of your waist over the belly button. Keep the tape parallel to the ground, not too loose or too tight.

STEP 2 - Find your jacket size by checking measurements against the size chart provided
- If both the measurements do not fall in one particular size - use the larger of the two measures to choose the jacket size.
- If the two measurements are on the border line between two sizes, choose the one that offers a preferred fit i.e. sporty fit (lower size) or comfort fit (higher size) depending on your preference.

Remember, each brand has its own body size charts, so do check the chart before you select the size.
Please watch the video explaining these steps and reach out to us if you need help!

How to check if the armour is in the right position and how to make adjustments to ensure the armours stay in place?

If you are trying it on at the store, wear it for 5-10 min to get comfortable in it. Keep in mind that the Spencer is designed to work best in the riding posture with the arms forward. So other movements could feel restrictive.

STEP 1 - Confirm that the armours are in the correct position The jacket fit should be such that the armours are in the anatomically correct position. Since we are all unique, this could mean that the elbow armour might be slightly off in some cases depending on length of your arms.

STEP 2 - Ensure the armours are properly positioned.
- In case the jacket fit is correct but the elbow armour is slightly off, use the cinching mechanism to adjust the elbow armour and bring it closer to your body.
- To do so, first make sure the ladderlock is not on the same line as the webbing.
- Pull the ladderlock slightly away from the body, and simply pull it away from the loop to tighten or towards the loop to loosen.
- You also have cinch straps on the hips for adjustment.

Please watch the video explaining these steps and reach out to us if you need help!

Engineered with durable Cordura Nylon 6,6, the Spencer Mesh Riding Jacket is built for high-performance protection. Reinforced impact zones provide enhanced resistance against wear and tear, while advanced mesh construction maximises breathability. High-quality fasteners and bar-tacked stress points ensure long-lasting durability. Level 2 SasTec armours designed with special material that harden on impact while absorbing the energy but remain soft & flexible. Original YKK zippers & pullers for extra durability and smooth operation of zips with best in class coverage with 180 jacket-pant connector

The Spencer Street Mesh Jacket packs CE Level 2 Sas-Tec armour at the shoulders, elbows, and back to handle high-impact zones without sacrificing flexibility. Dual-layer Cordura at key impact zones gives you serious abrasion resistance right where it’s needed most. Add an optional chest protector with the included 180-degree pant connector to level up safety for street rides or long touring days.

Designed with the riding posture in mind, the Spencer jacket features FocusFit ergonomics to keep the armour snug and perfectly positioned without constant readjustments. Strategic cinch points at the elbows and waist let you fine-tune the fit for all-day comfort on the saddle. The lightweight construction and articulated design reduce fatigue, even on longer rides.

Large mesh panels across the chest, back, and inner arms let air flow freely through the jacket, keeping you cool even in peak summer heat. The Sas-Tec armours are also ventilated to allow airflow through impact zones. Even the inner pocket linings are mesh so nothing blocks the breeze.

Strategically placed reflective panels on the front, back, and arms boost visibility without making the jacket look overly flashy. These reflectives light up under headlights to ensure you're seen clearly during night rides. The placement is balanced to maintain clean aesthetics during the day.

IMPORTANT NOTE:
Body armours/ protectors must always be removed before starting the washing process

CLEAN & CARE:
- For dirt and stains, clean with a soft-bristled brush and lukewarm water (DO NOT USE HOT WATER)
- DO NOT allow your jacket to come in contact with solvents (do not use fabric softener!), fuel, or cleaning agents.
- DO NOT use any kind of CHEMICAL or ALCOHOL-BASED product. For longer life of the fabric, we recommend hand washing the jacket using mild detergent
- Do not place your jacket near, or come in contact with a direct heat source
- Dry the jacket on a hanger away from direct sunlight where there is good ventilation.
- Zippers need to be cleaned and lubricated regularly - you can use vaseline or candle wax

STORAGE:
- Make sure your jacket is completely dry with armours removed before you store it on a hanger.
- If stored wet or in a non-ventilated area as it allows mildew to grow on the fabric causing discoloration and damage
- Do not store the jacket in air-tight plastic bags

Please watch the video explaining these steps and reach out to us if you need help!

Keep in mind that the Spencer is designed to work best in the riding posture with the arms forward. So other movements could feel restrictive.
- Even the best of protective armour is of no use if it is not in the right place. The exoskeleton of the Spencer Mesh Riding Jacket is designed to sit close to the body to ensure that the armour stays in position without needing constant adjustment. The placement of armour in your riding jacket is just as important as the type of armour used.
- We deisgned the Spencer Jacket carefully to ensure that the SAS-TEC CE Level 2 armour is placed at (and stays in) the correct position when you're riding your motorcycle.
- The Viaterra Spencer offers superior impact protection and abrasion resistance despite being an extremely light and well-ventilated riding jacket. We achieved this by using a combination of a special blend of mesh and fabric in the construction of the jacket, as well as by using premium SAS-TEC CE Level 2 protectors for the elbows, shoulder and back.
- Spencer is designed to allow maximum ventilation in all key areas as determined by the body heat map. We even made sure that the inner lining of our jacket pockets (except the waterproof one) are made of mesh so that it does not inhibit the flow of air when you're on the move.
- The inner lining of the jacket is also treated with an anti-microbial and odour neutralising coating so that you can stay more fresh even on your longer rides. Try one on today, and you will immediately understand what a huge difference this makes to the comfort of the rider.

RISK FREE RETURNS
Concerned that you might not like what you get? While we are extremely confident that you will be more than satisfied with our riding jacket, we understand that sometimes you might be looking for something different. Not to worry, we offer a zero risk trial within 7 calendar days of delivery. And no, you don't need to pay for the return shipping if you have shared measurements & double checked size with us. Please write to us on help@viaterra.in if you have any further queries or need clarifications.

FREE SIZE EXCHANGE
Worried about choosing the wrong size when buying online? We offer a free size exchange within 7 calendar days of delivery. If you’ve shared your measurements and confirmed the size with us, we’ll arrange a free pickup from your address and ship the replacement once the jacket is received in unused condition. Please write to us on help@viaterra.in if you have any further queries or need clarifications.

With regular use—or in the event of an unfortunate fall/ accident—fabrics may tear, zippers can get stuck, and plastic fittings may break. Instead of replacing your expensive gear, our extended repair support helps bring it back to use. Please write to us on help@viaterra.in if you require any help with repairs or have any questions!

Product name: SPENCER – STREET MESH MOTORCYCLE RIDING JACKET
Name of the commodity: Motorcycle Apparel
Manufactured/Imported By: ViaTerra Travel Gear Pvt Ltd, OS-2, Opp H-18, MIDC Satpur, Nashik 422007
Country of Origin: India
Price, wherever mentioned, is MRP and inclusive of all taxes

For customer complaints and support, email or call us
Customer Care Contact : 88866 51324
Email ID: help@viaterra.in