B100 – Rain Jacket

Each brand has its own unique sizing, so we strongly suggest comparing your measurements with our sizing chart to arrive at the suitable size. We have given both the body measurements as well as the garment measurements for each size for your easy reference. 

If you intend to wear the rainwear for regular non-riding use (over everyday clothes), please measure your body & compare the same with our sizing chart. 

If you intend to wear the rainwear over your riding gear, we recommend measuring yourself with the riding gear on & compare the measurements with our sizing chart.

Please ensure there is an additional ease of at least 6-10 cm, i.e. the rainwear allows you adequate space & is not tight fitting. 

You can check this by wearing the rainwear and stretching your arms out in the riding position to confirm there is no noticeable pulling at the shoulders and the torso area. 

Tight fitting rainwear could lead to faster wear and tear.

1. Try to avoid accumulation of water on the rain wear (within folds on the rainwear or at the crotch area on the motorcycle seat), as this might result in ingress of water over time. Smoothening the zipper flaps to avoid folds helps. To avoid accumulation of water on the motorcycle seat (at the crotch area) during continuous rain, standing up intermittently helps. 

2. For comfort, the collar on the rain jacket is not designed to be very tight. To prevent water getting in from this area, tucking in the collar properly under the helmet or alternatively using the hood under the helmet helps. 

3. You might experience moisture on the inner part of the rainwear caused by condensation due to the temperature differential between the outside atmosphere and your body heat. This is similar to what you can see on a glass of cold water, which develops water beads on the outside. Being a natural phenomenon the same is unavoidable. However this would not be to an extent where you would be completely wet.

Risk Free Trial: 

Concerned that you might not like what you get? While we are extremely confident that you will be more than satisfied with our jackets, we understand that sometimes you might be looking for something different. Not to worry, we offer a zero risk trial within 3 days from the date of delivery. And no, you don’t need to pay for the return shipping. Please click here for more details. 

Free Size exchange: 

Worried about the wrong size if you buy online? You can exchange for size within 3 days from the date of delivery at ZERO cost – yup, we will get the jackets picked up from your address and send a replacement once we receive them in an unused condition. Please click here for more details.

PU laminated polyester fabric rated for 10000mm water column pressure 

YKKTM Aquaguard zipper 

Weight ~200 gms

CLEAN & CARE: 

For dirt and stains, wipe clean with a damp cloth and lukewarm water (DO NOT USE HOT WATER) DO NOT allow your rainwear to come in contact with solvents (do not use fabric softener!), fuel, or cleaning agents. DO NOT use any kind of CHEMICAL or ALCOHOL-BASED product. Do not place your rainwear near, or come in contact with a direct heat source Dry the rainwear on a hanger away from direct sunlight where there is good ventilation. Zippers need to be cleaned and lubricated regularly - you can use Vaseline or candle wax 

STORAGE: 

Make sure your rainwear is completely dry before you store it on a hanger. If stored wet or in a non-ventilated area as it allows mildew to grow on the fabric causing discoloration and damage

Warranty 

We provide a 6 months warranty against defects in materials or craftsmanship if purchased directly from us or from an authorized dealer. Please click here for details. 

Repairs 

Minor repairs of opened stitches, tears, Velcro etc. due to normal wear and tear can be done at a reasonable charge. Send us an email with pictures so we can determine if the jacket can be repaired or not. Please click here for details.