SPENCER – STREET MESH MOTORCYCLE RIDING PANTS

Things to keep in mind to ensure the measurements are taken correctly
- It will be helpful to have a family member or a friend take the measurements
- Please use flexible tape only, like a tailor’s tape
- All the measurements must be in the same units, whether cm or inches
- You should preferably be wearing base layers while taking measurements, and avoid anything bulky

STEP 1 - Measure using a tailor's tape
There are two key measurements that you need to take into consideration for figuring out your pants size.
A) High hip - Wrap the tape around your belt line. Keep the tape parallel to the ground, not too loose or too tight.
B) In seam length - Hold a hard bound book between your legs, and then measure from the top edge of the book to the ankle.

STEP 2 - Refer to the body size chart on our website to find the size closest to your measurements.
- ViaTerra offers riding pants with two inseam lengths for each waist size — Short and Regular — allowing you to choose based on your height.
- If both your measurements do not fall within one specific size, use the inseam length to choose the pants size.
- The waist can be adjusted using the belt-loop system provided.

Remember, each brand has its own body size charts, so do check the chart before you select the size.
Please watch the video explaining these steps and reach out to us if you need help!

How to check if the armour is in the right position and how to make adjustments to ensure the armours stay in place while on the motorcycle?

If you are trying it on at the store, wear it for 5-10 min to get comfortable in it. Keep in mind that the Spencer is designed to work best in the riding posture - so other movements could feel restrictive. So check the fit of the pants on a chair or in a riding position.

STEP 1 - Check armour position
- The primary fit check has to be around the lower hip and the thighs.
- For the knee, take a seat and bend the knee. Once bent, ensure the armour is atleast 2 inch over the knee and is covering the sides of the knee equally.
- We have given a complete belt system to offer maximum adjustability around the waist. This also allows you to add the tailbone armour if you wish to.

STEP 2 - Adjust armour position
In case the pants fit is correct but the knee armour is slightly off, use the cinching mechanism to adjust and bring the armour closer to your body.
- To do so, first make sure the ladderlock is not on the same line as the webbing.
- Hold the ladderlock perpendicular to the webbing and simply pull them right or left to loosen or tighten.
- You also have cinch straps on the hems for adjustment.

Please watch the video explaining these steps and reach out to us if you need help!

Crafted from high-strength Cordura Nylon 6,6, the Spencer pants provide superior abrasion and tear resistance for enhanced rider safety. The strategically placed stretch panels ensure flexibility, while the breathable mesh lining improves airflow for all-day comfort. Level 2 SasTec armours designed with special material that harden on impact while absorbing the energy but remain soft & flexible. Original YKK zippers & pullers for extra durability and smooth operation of zips with best in class coverage with 180 jacket-pant connector.

Sas-Tec Level 2 armour at the knees and hips comes standard, giving you top-tier impact absorption without compromising on comfort. Dual-layer Cordura panels reinforce all impact zones, shielding you from abrasion while holding up ride after ride. You can further level up safety with optional tailbone armour and the included 180-degree pant connector—ideal for both everyday street riding and long touring days.

Designed with our FocusFit ergonomic system, the Spencer riding pants feels like your favourite pair of track pants but built for the road. The 4-way stretch fabric, pre-curved knees, and no-bulk fit let the pants move with you - on or off the bike. Multiple inseam options and a full waist belt system ensure you get a size that actually fits. The lightweight construction and articulated design reduce fatigue, even on longer rides.

Mesh panels are placed right where your body heats up most, so you stay cool even in peak traffic or long summer hauls. The Sas-Tec Level 2 armours are perforated too - air passes through them easily without compromising protection. Even the pocket construction is airflow-friendly, keeping your ride breezy without bulking you up.

Ride safer at night with well-placed reflectives that boost visibility without screaming for attention during the day. They’re subtly integrated into the design so you stay seen without compromising style. Whether you’re lane filtering or cruising, you’ll stand out when it counts.

IMPORTANT NOTE: Body armours/ protectors must always be removed before starting the washing process

CLEAN & CARE:
- For dirt and stains, clean with a soft-bristled brush and lukewarm water
- DO NOT USE HOT WATER
- DO NOT allow your pants to come in contact with solvents (do not use fabric softener!), fuel, or cleaning agents.
- DO NOT use any kind of CHEMICAL or ALCOHOL-BASED product.
- For longer life of the fabric, we recommend hand washing the pants using mild detergent Do not place your pants near, or come in contact with a direct heat source
- Dry the pants on a hanger away from direct sunlight where there is good ventilation.
- Zippers need to be cleaned and lubricated regularly - you can use zipper lube, vaseline or candle wax

STORAGE:
- Make sure your pants are completely dry before you store it on a hanger.
- If stored wet or in a non-ventilated area as it allows mildew to grow on the fabric causing discoloration and damage
- Do not store the pants in air-tight plastic bags

Keep in mind that the Spencer is designed to work best in the riding posture - so other movements could feel restrictive.
- Spencer mesh riding pants are the first to offer multiple inseam lengths of the same waist size. No more slapping or adjusting the armour to compensate for the extra length of the pants.
- The Spencer mesh riding pants offer unmatched ventilation, comfort and dexterity like no other. Designed for the ride with its pre-curved knees and ergonomically placed stretch panels, the Spencer enables you to move around with ease.
- With best in class CE Level 2 protection from Sas-Tec Germany and dual layer impact zones with Cordura panels, the Spencer is ready to shield you when required. The Spencer riding pants also come with the option to include tailbone protection.
- A good fitting riding pants should fit well with no additional adjustability. The FocusFit design of the Spencer offers unmatched fit and comfort allowing the armours to sit closer to the body without causing any discomfort. This is crucial to make sure the armours are in right place during a crash to absorb impact effectively.
- The Viaterra Spencer Riding Jacket and Pant feature matching 180 degree zipper connectors. This offers improved lumbar protection by holding a wider section of the jacket and pant together preventing them from riding apart during a crash.

RISK FREE RETURNS
Concerned that you might not like what you get? While we are extremely confident that you will be more than satisfied with our riding pants, we understand that sometimes you might be looking for something different. Not to worry, we offer a zero risk trial within 7 calendar days of delivery. And no, you don't need to pay for the return shipping if you have shared measurements & double checked size with us. Please write to us on help@viaterra.in if you have any further queries or need clarifications.

FREE SIZE EXCHANGE
Worried about choosing the wrong size when buying online? We offer a free size exchange within 7 calendar days of delivery. If you’ve shared your measurements and confirmed the size with us, we’ll arrange a free pickup from your address and ship the replacement once the jacket is received in unused condition. Please write to us on help@viaterra.in if you have any further queries or need clarifications.

With regular use—or in the event of an unfortunate fall/ accident—fabrics may tear, zippers can get stuck, and plastic fittings may break. Instead of replacing your expensive gear, our extended repair support helps bring it back to use. Please write to us on help@viaterra.in if you require any help with repairs or have any questions!

Product name: SPENCER – STREET MESH MOTORCYCLE RIDING PANTS
Name of the commodity: Motorcycle Apparel
Manufactured/Imported By: ViaTerra Travel Gear Pvt Ltd, OS-2, Opp H-18, MIDC Satpur, Nashik 422007
Country of Origin: India
Price, wherever mentioned, is MRP and inclusive of all taxes

For customer complaints and support, email or call us
Customer Care Contact : 88866 51324
Email ID: help@viaterra.in