SPENCER – STREET MESH MOTORCYCLE RIDING JACKET

Things to keep in mind to ensure the measurements are taken correctly 

• It will be helpful to have a family member or a friend take the measurements 
• Please use flexible tape only, like a tailor’s tape 
• All the measurements must be in the same units, whether cm or inches 
• You should preferably be wearing base layers while taking measurements, and avoid anything bulky 

STEP 1 - Measure using a tailor's tape 

There are two key measurements that you need to take into consideration for figuring out your jacket size. 

A) Chest - Wrap the tape measure around the widest part of the chest and do not inhale while taking the measurement. Tape measure over your chest should be comfortable i.e. not too tight or loose. Keep your arms loose on the sides, and breathe in normally. 

B) Waist - Measure the circumference of your waist over the belly button. Keep the tape parallel to the ground, not too loose or too tight. 

STEP 2 - Find your jacket size by checking measurements against the size chart provided 

- If both the measurements do not fall in one particular size - use the larger of the two measures to choose the jacket size. 

- If the two measurements are on the border line between two sizes, choose the one that offers a preferred fit i.e. sporty fit (lower size) or comfort fit (higher size) depending on your preference. 

Remember, each brand has its own body size charts, so do check the chart before you select the size. 

Please browse through the product video section to watch a video explaining these steps.

How to check if the armour is in the right position and how to make adjustments to ensure the armours stay in place?

If you are trying it on at the store, wear it for 5-10 min to get comfortable in it. Keep in mind that the Spencer is designed to work best in the riding posture with the arms forward. So other movements could feel restrictive. 

STEP 1 - Confirm that the armours are in the correct position The jacket fit should be such that the armours are in the anatomically correct position. Since we are all unique, this could mean that the elbow armour might be slightly off in some cases depending on length of your arms.

STEP 2 - Ensure the armours are properly positioned. - In case the jacket fit is correct but the elbow armour is slightly off, use the cinching mechanism to adjust the elbow armour and bring it closer to your body. - To do so, first make sure the ladderlock is not on the same line as the webbing. Pull the ladderlock slightly away from the body, and simply pull it away from the loop to tighten or towards the loop to loosen. You also have cinch straps on the hips for adjustment. Click here to watch a video explaining these steps

Keep in mind that the Spencer is designed to work best in the riding posture with the arms forward. So other movements could feel restrictive. 

• Even the best of protective armour is of no use if it is not in the right place. The exoskeleton of the Spencer Mesh Riding Jacket is designed to sit close to the body to ensure that the armour stays in position without needing constant adjustment. The placement of armour in your riding jacket is just as important as the type of armour used. 
• We deisgned the Spencer Jacket carefully to ensure that the SAS-TEC CE Level 2 armour is placed at (and stays in) the correct position when you're riding your motorcycle. 
• The Viaterra Spencer offers superior impact protection and abrasion resistance despite being an extremely light and well-ventilated riding jacket. We achieved this by using a combination of a special blend of mesh and fabric in the construction of the jacket, as well as by using premium SAS-TEC CE Level 2 protectors for the elbows, shoulder and back.
• Spencer is designed to allow maximum ventilation in all key areas as determined by the body heat map. We even made sure that the inner lining of our jacket pockets (except the waterproof one) are made of mesh so that it does not inhibit the flow of air when you're on the move. 
• The inner lining of the jacket is also treated with an anti-microbial and odour neutralising coating so that you can stay more fresh even on your longer rides. Try one on today, and you will immediately understand what a huge difference this makes to the comfort of the rider. 

RISK FREE RETURNS

Concerned that you might not like what you get? While we are extremely confident that you will be more than satisfied with our riding jacket, we understand that sometimes you might be looking for something different. Not to worry, we offer a zero risk trial within 7 calendar days of delivery. And no, you don't need to pay for the return shipping. Please write to us on contactus@viaterragear.com if you have any further queries or need clarifications.

FREE SIZE EXCHANGE

Worried about the wrong size if you buy online? You can exchange for size within 7 calendar days of delivery at ZERO cost – yup, we will get the riding jacket picked up from your address and send a replacement once we receive them in an unused condition. Please write to us on contactus@viaterragear.com if you have any further queries or need clarifications.

Level 2 Armour for superior impact protection - Sas-Tec armours designed with special material that harden on impact while absorbing the energy but remain soft & flexible.

• Sas-Tec Shoulder Level 2 armour set
• Sas-Tec Elbow Level 2 armour set
• Sas-Tec Back Level 2 armour
• SAS-TEC Chest Level 1/ Lever 2 armour (optional)

180 Pant connector - Best in class coverage with 180 pant connector

YKK Zippers - Original YKK zippers & pullers for extra durability and smooth operation of zips. ergonomics designed for riding position.

Viaterra's proprietary FocusFit

Lightest L2 jacket with L2 protection

Excellent Comfort and ventilation during long rides

IMPORTANT NOTE:

Body armours/ protectors must always be removed before starting the washing process

CLEAN & CARE:

• For dirt and stains, clean with a soft-bristled brush and lukewarm water (DO NOT USE HOT WATER)
• DO NOT allow your jacket to come in contact with solvents (do not use fabric softener!), fuel, or cleaning agents.
• DO NOT use any kind of CHEMICAL or ALCOHOL-BASED product. For longer life of the fabric, we recommend hand washing the jacket using mild detergent
• Do not place your jacket near, or come in contact with a direct heat source
• Dry the jacket on a hanger away from direct sunlight where there is good ventilation.
• Zippers need to be cleaned and lubricated regularly - you can use vaseline or candle wax

STORAGE:

• Make sure your jacket is completely dry before you store it on a hanger.
• If stored wet or in a non-ventilated area as it allows mildew to grow on the fabric causing discoloration and damage
• Do not store the jacket in air-tight plastic bags

Warranty

We provide a 12 months warranty against defects in materials or craftsmanship if purchased directly from us or from an authorized dealer. Please click on Warranty policy and choose the relevant category for further details.

Lifetime repair support

Fabrics fade, zippers get stuck, plastic fittings break – a few things that could happen with usage. We believe in extending the life of our products so that we use lesser natural resources and you get more bang for your buck. Please write to us on contactus@viaterragear.com if you require any help with repairs or have any questions! 

Product name: SPENCER – STREET MESH MOTORCYCLE RIDING JACKET

Name of the commodity: Motorcycle Apparel

Manufactured/Imported By: ViaTerra Travel Gear Pvt Ltd, OS-2, Opp H-18, MIDC Satpur, Nashik 422007

Country of Origin: India

Price, wherever mentioned, is MRP and inclusive of all taxes.

Customer Support

For customer complaints and support, email or call us:

• Customer Care Contact: 0253 2996744
• Email Id: contactus@viaterragear.com