A harness-mounted tank bag built for riders who don’t know where the day will end. Part of the Light & Far Adventure series, the LFA XC Tank bag is made for those who chase better roads, take detours without hesitation, and carry what they might need along the way. With added capacity and a stable, out-of-the-way design, it lets you go further without second-guessing what you packed.
USP 1
Detaches in seconds while the Y-shaped harness remains mounted, making fuel stops and short halts faster and more convenient.
USP 2
X-Pac, Cordura, and High Tenacity Polyester are strategically placed to optimise weight, abrasion resistance, structure retention and long-term durability.
USP 3
A tapered front profile and foam-supported construction maintain stability while preventing handlebar interference at full lock.
The frame-mounted Y-shaped harness distributes load across stable mounting points and remains on the motorcycle, allowing the bag to be removed without disturbing the setup.
Dual Frame Anchoring
The harness secures to the frame at the front via a headstock-mounted strap and at the rear via a single-point anchor, both adjusted using cam buckles to maintain stability while riding and reduce any movement.
Quick-Release Buckles
Two front quick-release buckles allow fast detachment of the bag from the harness, reducing downtime during refuelling or stops.
Reinforced Rear Latch
A rear gatekeeper buckle secures the bag to the harness while allowing controlled disengagement, with X-Pac reinforcement at the interface to improve abrasion resistance and reduce wear at a high-stress point.
Surface Protection Interface
The underside uses a soft felt-like material to reduce the risk of scuffing the tank, while a suede leather patch at the rear contact point minimises abrasion against painted panels and frame surfaces.
HT Polyester Base
High Tenacity Polyester at the base panel enhances durability in high-contact areas and supports long-term structural stability.
Reinforced Structured Body
The main body uses genuine Cordura for abrasion resistance, supported by integrated foam panels that help maintain shape and prevent sagging during riding.
Structured Storage Lid
The top lid combines High Tenacity Polyester and X-Pac to maintain structure, with an integrated elastic cord system for quick stashing of gloves or lightweight layers without accessing the main compartment.
Ergonomic Tapered Profile
The front section is narrowed to prevent interference with handlebars at full lock, maintaining rider comfort and control during tight manoeuvres.
X-Pac Pocket Panels
Side pockets and the rear external pocket use X-Pac fabric to improve structural integrity and resistance to tearing.
Lid Mesh Pocket
The inside of the lid features a flat zippered mesh pocket for separating smaller essentials from the main load.
High-Visibility Liner
All compartments use a light-coloured liner to improve visibility and make stored items easier to locate.
All-Weather Coverage
Includes an external rain cover with seam-sealed construction to prevent water ingress during sustained rainfall, a dedicated external pocket for quick-access storage when not in use, and a 3M reflective element to enhance visibility in low-light conditions.
Custom Patch Panel
A Velcro panel on the lid allows riders to attach patches of their choice.
Integrated Grab Handle
A reinforced grab handle allows the tank bag to be carried easily when off the motorcycle.
Premium Hardware
YKK zippers and Duraflex buckles are used throughout to ensure smooth operation, secure load management and long-term reliability under regular riding conditions.
Videos
SPECIFICATIONS
Construction and Durability
Volume and Compartments
Material
Mounting and Mounting Guide
Wash and Care
Things to Remember
Legal Metrology Data
Construction and Durability
Built using genuine 500D Cordura, X-Pac and High Tenacity Polyester fabrics, the LFA Tank Bag is designed to balance durability, structure and low weight for demanding riding conditions. Integrated foam support panels help the bag retain shape and remain stable during riding, while the ergonomically tapered profile reduces interference during full-lock turns.
Harness-based mounting system designed for improved stability during off-road riding
Reinforced rear latch interface with X-Pac for improved abrasion resistance at high-stress areas
Soft felt-lined base and suede leather contact patch help reduce abrasion against motorcycle surfaces
External rain cover with seam-sealed construction for improved weather protection
Light-coloured interior lining improves visibility of packed items
Triple stitching at critical joints for improved seam strength
Bar-tacked reinforcement at stress points for improved durability
Built using genuine YKK™ zippers and genuine Duraflex™ hardware throughout
Volume and Compartments
6L main compartment
1.5L combined external pocket capacity
Main compartment
Dual side pockets
Rear quick-access pocket
Internal lid mesh pocket
External quick-stash utility storage
Material
Fabrics: Built using genuine 500D Cordura, X-Pac and High Tenacity Polyester fabrics.
Inner Lining: Light-coloured inner lining improves visibility inside the compartments.
Zippers & Pullers: Only genuine YKK™ sliders and zipper tape are used throughout the system for long-term reliability and smooth operation.
Hardware & Fittings: All buckles and fittings are from genuine Duraflex™ or imported hardware for dependable performance under regular riding conditions.
Foam Structure: Integrated foam support panels help the tank bag maintain shape and reduce sagging while riding.
Protection Interface: Soft felt-lined contact surface and suede leather protection patch help reduce abrasion against painted motorcycle surfaces.
Webbing: High-strength polyester webbing is used throughout the mounting and adjustment system for durability and load stability.
Thread: High-tenacity Nylon-6 thread is used in critical construction areas to improve seam strength and long-term durability.
Mounting and Mounting Guide
Y-shaped harness-based mounting system
Front mounting loops around the headstock
Rear single-point frame mounting
Harness remains mounted during fuel stops
Bag attaches using quick-release buckles and reinforced rear gatekeeper latch
Compatible with most adventure, dual-sport and touring motorcycles
Wash and Care
1. Wipe it clean with a damp cloth using mild soap and water.
2. Avoid harsh chemicals or fabric stain removers, as they may damage the material.
3. If there are stains which you are not able to remove using a damp cloth, use a soft bristled brush soaked in a mild pH neutral soap and rinse off using cold water. Please note that using the brush could lead to piling which will not be covered under warranty.
4. Ensure all zippers and buckles are free from dirt and debris to maintain smooth operation.
5. Allow the bag to air dry completely before storage to prevent moisture buildup and fabric deterioration. Store away from the sun & other heat sources.
6. Remove bags from the bike when not in use to avoid fabric fading.
7. Dry-cleaning or machine washing or using a clothes dryers or hand/dhobi washing or soaking will void the warranty as this will damage the special coatings that the fabric has.
8. Do not alter the product or get it repaired at an unauthorized repair centre as this will void the warranty.
9. When you are storing the bag, please do not stuff the item into a smaller space/container as this will damage the coating and void the warranty.
Things to Remember
1. When choosing a tank bag, consider your primary use - whether for daily essentials or long-distance touring, to determine the right capacity.
2. Look for functional features like waterproofing, organisational pockets, and universal fit if you ride multiple bikes.
3. Lastly, pick a size that doesn’t obstruct your vision, handlebar movement, or essential controls, ensuring both convenience and safety on the road.
4. Ensure all mounting straps are securely tensioned before riding
5. Avoid overloading external storage areas
6. Periodically check buckle and strap tension during long rides
7. Use the rain cover during sustained rainfall
7. Keep away from sharp edges or hot surfaces
Legal Metrology Data
Product name: LFA XC Tank Bag Name of the commodity: Motorcycle Tank Bag Manufactured/Imported By: ViaTerra Travel Gear Pvt Ltd,
OS-2, Opp H-18, MIDC Satpur, Nashik 422007
Country of Origin: India
Price, wherever mentioned, is MRP and inclusive of all taxes
For customer complaints and support, email or call us Customer Care Contact : 88866 51324
Email Id: contactus@viaterragear.com
The tank bag includes a seam-sealed external rain cover for protection during wet-weather riding.
Does the harness need to be removed during refuelling on the LFA - Tank Bag - XC?
No, the harness does not need to be removed during refuelling. The LFA - Tank Bag - XC is designed for quick and convenient fuel access, allowing you to refuel without uninstalling the entire harness setup.
Will the tank bag scratch my motorcycle?
The underside uses a soft felt-like material along with a suede protection patch to reduce the risk of scratches and abrasion.
Can the tank bag interfere with handlebar movement?
The tapered front profile is designed to prevent interference during full-lock turns on most motorcycles.
