Kruger Pro Touring Pants

Things to keep in mind to ensure the measurements are taken correctly
- It will be helpful to have a family member or a friend take the measurements
- Please use flexible tape only, like a tailor’s tape
- All the measurements must be in the same units, whether cm or inches
- You should preferably be wearing base layers while taking measurements, and avoid anything bulky

STEP 1 - Measure using a tailor's tape
There are two key measurements that you need to take into consideration for figuring out your pants size.
A) High hip - Wrap the tape around your belt line. Keep the tape parallel to the ground, not too loose or too tight.
B) In seam length - Hold a hard bound book between your legs, and then measure from the top edge of the book to the ankle.

STEP 2 - Refer to the body size chart on our website to find the size closest to your measurements.
- ViaTerra offers riding pants with two inseam lengths for each waist size — Short and Regular — allowing you to choose based on your height.
- If both your measurements do not fall within one specific size, use the inseam length to choose the pants size.
- The waist can be adjusted using the belt-loop system provided.

Remember, each brand has its own body size charts, so do check the chart before you select the size.
Please watch the video explaining these steps and reach out to us if you need help!

How to check if the armour is in the right position and how to make adjustments to ensure the armours stay in place while on the motorcycle?

If you are trying the pants on at the store, wear them for 5–10 minutes to get comfortable. Keep in mind that the pants are designed to work best in the riding posture, so some other movements may feel slightly restrictive.

STEP 1 - Confirm that the armours are in the correct position:
- The primary fit check should be around the lower hip and thighs.
- The pants include a complete belt system for maximum adjustability at the waist, which also allows you to add the tailbone armour if required.

STEP 2 - Ensure the armours are properly positioned:
- For the knee, take a seat and bend your leg. When bent, ensure the armour sits at least 2 inches above the knee and covers both sides evenly.
- If the pants fit well but the knee armour feels slightly misaligned, use the cinching mechanism to bring the armour closer to your body.
- To adjust, ensure the ladderlock is not aligned with the webbing. Hold the ladderlock perpendicular to the webbing and pull it left or right to tighten or loosen. Cinch straps at the hems offer additional adjustment.

Please watch the video explaining these steps and reach out to us if you need help!

The Kruger Pro Pants feature a dual-reinforced construction with genuine SuperFabric and Invista Cordura at all key impact and abrasion zones for unmatched cut and slide resistance. Supporting areas are reinforced with durable 600D Oxford and Ripstop fabrics for added strength. Heavy-duty fittings, precision stitching, and reinforced panels ensure long-lasting durability for the toughest touring conditions. Level 2 SasTec armours designed with special material that harden on impact while absorbing the energy but remain soft & flexible. Original YKK zippers & pullers for extra durability and smooth operation of zips with best in class coverage with 180 jacket-pant connector.

Equipped with Sas-Tec CE Level 2 Type B knee and hip armour, along with tailbone protection (optional), the Kruger Pro Pants provide top-tier impact absorption without restricting movement. Dual-layer SuperFabric and Cordura reinforcements at all high-abrasion zones prevent tearing and slide-through damage, while the 180° pant connector ensures the jacket and pants stay aligned during a fall for full lower-body coverage.

The Kruger Pro Pants feature a ratchet closure system at the waist and dual adjustable knee straps for a precise, custom fit that keeps armour securely in place. Pre-curved knees and large stretch panels at the crotch, hips, and calves provide unrestricted movement and all-day comfort, while the BootFlex system ensures a secure fit over riding boots without restricting mobility.

Built for India’s tropical riding conditions, the Kruger Pro Pants feature extensive mesh coverage and moisture-wicking inner lining to maximise airflow over key heat zones. The Sas-Tec Level 2 armours are perforated too - air passes through them easily without compromising protection. Stretch panels at the crotch, hips, and calves enhance breathability, keeping you cool, dry, and comfortable even on long, hot rides.

3M reflective strips below the calves and at strategic points on the pants ensure maximum visibility from multiple angles. They keep riders seen in low-light conditions without compromising the pants’ sleek, technical look during the day.

IMPORTANT NOTE: Body armours/ protectors must always be removed before starting the washing process

CLEAN & CARE:
- For dirt and stains, clean with a soft-bristled brush and lukewarm water
- DO NOT USE HOT WATER
- DO NOT allow your pants to come in contact with solvents (do not use fabric softener!), fuel, or cleaning agents.
- DO NOT use any kind of CHEMICAL or ALCOHOL-BASED product.
- For longer life of the fabric, we recommend hand washing the pants using mild detergent Do not place your pants near, or come in contact with a direct heat source
- Dry the pants on a hanger away from direct sunlight where there is good ventilation.
- Zippers need to be cleaned and lubricated regularly - you can use zipper lube, vaseline or candle wax

STORAGE:
- Make sure your pants are completely dry before you store it on a hanger.
- If stored wet or in a non-ventilated area as it allows mildew to grow on the fabric causing discoloration and damage
- Do not store the pants in air-tight plastic bags

The Kruger Pro Touring pants offer unmatched ventilation, comfort and dexterity like no other. Designed for the ride with pre-curved knees and ergonomically placed stretch panels, the Kruger Pro enables you to move around with ease.
- With best-in-class CE Level 2 protection from SAS-TEC and dual-layer impact zones combining SuperFabric with Cordura panels, the Kruger Pro is ready to shield you when required. It comes with the option to include tailbone protection.
- Kruger Pro mesh riding pants offer multiple inseam lengths for the same waist size, so there's no need to adjust the armour to compensate for extra pant length. A good-fitting riding pant should fit well without constant readjustment.
- The FocusFit design of the Kruger Pro delivers an unmatched fit and comfort, allowing the armours to sit closer to the body without causing discomfort. This close fit is crucial to ensure the armours remain in the right position during a crash and absorb impact effectively.
- Pre-curved knees and ergonomic stretch panels for superior mobility
- CE Level 2 SAS-TEC armour (hips/ knees) for best-in-class impact protection with optional tailbone protection
- Dual-layer impact zones with SuperFabric + Cordura
- Multiple inseam lengths for each waist size
- FocusFit design for a secure, comfortable armour fit

RISK FREE RETURNS
Concerned that you might not like what you get? While we are extremely confident that you will be more than satisfied with our riding pants, we understand that sometimes you might be looking for something different. Not to worry, we offer a zero risk trial within 7 calendar days of delivery. And no, you don't need to pay for the return shipping if you have shared measurements & double checked size with us. Please write to us on help@viaterra.in if you have any further queries or need clarifications.

FREE SIZE EXCHANGE
Worried about choosing the wrong size when buying online? We offer a free size exchange within 7 calendar days of delivery. If you’ve shared your measurements and confirmed the size with us, we’ll arrange a free pickup from your address and ship the replacement once the jacket is received in unused condition. Please write to us on help@viaterra.in if you have any further queries or need clarifications.

With regular use—or in the event of an unfortunate fall/ accident—fabrics may tear, zippers can get stuck, and plastic fittings may break. Instead of replacing your expensive gear, our extended repair support helps bring it back to use. Please write to us on help@viaterra.in if you require any help with repairs or have any questions!

Product name: Kruger Pro Motorcycle Riding Pants
Name of the commodity: Motorcycle Apparel
Manufactured/Imported By: ViaTerra Travel Gear Pvt Ltd, OS-2, Opp H-18, MIDC Satpur, Nashik 422007
Country of Origin: India
Price, wherever mentioned, is MRP and inclusive of all taxes

For customer complaints and support, email or call us
Customer Care Contact : 88866 51324
Email ID: help@viaterra.in