KRUGER – MOTORCYCLE TOURING RIDING GLOVES

Built using full-grain goat leather and heavy-duty 3D mesh, the Kruger strikes the perfect balance between durability and breathability. SuperFabric reinforced panels with HD EVA foam add serious slide protection across the palm, pinky, and gauntlet areas - without adding bulk. A silicone grip patch in the purlicue area enhances lever control even in wet weather.

Designed for touring and serious road use, the Kruger gloves feature CE Level 2-rated Sas-Tec knuckle protectors made of soft viscoelastic foam for high-impact absorption. The fingers are shielded with soft, flexible PVC inserts, while SuperFabric panels at key zones keep abrasion at bay. A dual-closure wrist system ensures the gloves stay on in a crash.

Pre-curved fingers and stretch panels across the knuckles give the Kruger a natural fit right out of the box - even with added insulation. External seams prevent pressure points during long rides, and the dual Velcro system lets you dial in your fit over or under your jacket cuff. The gloves also include touchscreen-compatible tips on the index and thumb for quick access on the go.

Step 1 – Measure Your Hand
Grab a tailor’s measuring tape and take two quick measurements:
Circumference – Wrap the tape around the widest part of your palm. Lightly close your hand before noting the number.
Length – Measure from the tip of your middle finger to the base of your palm (where your wrist starts).

Step 2 – Check the Size Chart
Match your measurements with the size chart to find the right fit.
If your length and circumference fall in different size categories, go with the larger one.
If you're in between sizes, try both and pick the one that feels better on the bike.
A good fit means better control, less fatigue, and max protection—don’t guess it.

STEP 1 - Confirm that the gloves are a comfortable fit.
They should not be excessively tight on all fingers (including the thumb) & knuckles.
To check this, try the gloves on and form a fist several times and verify if:
1. Adequate room for all fingers (specially thumb) to move and operate controls comfortably.
2. Check the fitment on both hands since your left and right hand sizes do vary.
Ensure that the fit on first try is not so tight as to cause discomfort and/or restrict movement

STEP 2 - Ensure the knuckle protectors are properly positioned.
The way to check this is:
1. Roll your hand into a tight fist and hold the position for 5-10 minutes. This position should be easy to hold without causing any discomfort or causing any stress points.
2. Ensure that the edge of the knuckle protector is not over the knuckle when the fist is formed."

Cleaning Your Gloves
What you’ll need:
Microfiber cloth, soft-bristled brush, absorbent towel, pH-neutral leather cleaner, leather conditioner, lukewarm water
Steps:
Mix a bit of leather cleaner with lukewarm water.
Dip the microfiber cloth, wring it slightly, and gently wipe the gloves clean.
Mud splatters? Let them dry first, then brush them off before wiping.
Work from wrist to fingertips, getting between each finger.
Rinse your cloth often so you’re not rubbing dirt back in.
Flip and repeat on the other side.
Important:
No hot water.
No harsh cleaners, fuel, fabric softener, or scrubbing.
No machines or pressure washers.
Don’t wring them.

Drying Wet Gloves
Gently press with an absorbent towel—do this even if it’s just rainwater.
Let them dry naturally, indoors, away from sunlight and heat.
Never use a dryer, radiator, or direct sunlight.
While drying, wear them occasionally to keep the shape.

Conditioning the Leather
Once dry, condition them. This keeps the leather flexible, breathable, and crack-free.
Use a good leather conditioner - nothing that clogs the pores.
Rub it in evenly and let it soak.
Wipe off any extra

Storing Your Gloves
Only store when completely dry.
Use a breathable cotton bag - skip plastic.
Keep them in a cool, ventilated place.
Take care of them, and they’ll take care of you on every ride.

1. The SuperFabric panels might feel a bit stiff initially - but they’ll get comfortable with regular use.
2. The snug wrist fit is intentional for safety, so don’t worry if it takes an extra moment to put them on.
3. Like all protective gear, they might feel bulky at first - comfort improves as the gloves adapt to your hand.
4. Avoid letting Velcro touch the mesh to prevent fraying, and don’t fold the knuckle area during storage.

Product name: KRUGER – FULL GAUNTLET TOURING GLOVES
Name of the commodity: Motorcycle Apparel
Manufactured/Imported By: ViaTerra Travel Gear Pvt Ltd,
OS-2, Opp H-18, MIDC Satpur, Nashik 422007
Country of Origin: Indonesia
Price, wherever mentioned, is MRP and inclusive of all taxes

For customer complaints and support, email or call us
Customer Care Contact : 88866 51324
Email ID: help@viaterra.in