Frost – Motorcycle Warm Jacket

Things to keep in mind to ensure the measurements are taken correctly -

• It will be helpful to have a family member or a friend take the measurements
• Please use flexible tape only, like a tailor’s tape
• All the measurements must be in the same units, whether cm or inches
• You should preferably be wearing base layers while taking measurements, and avoid anything bulky

STEP 1 - Measure using a tailor's tape There are two key measurements that you need to take into consideration for figuring out your jacket size.

A) Chest - Wrap the tape measure around the widest part of the chest and do not inhale while taking the measurement. Tape measure over your chest should be comfortable i.e. not too tight or loose. Keep your arms loose on the sides, and breathe in normally.

B) Waist - Measure the circumference of your waist over the belly button. Keep the tape parallel to the ground, not too loose or too tight.

STEP 2 - Find your jacket size by checking measurements against the size chart provided

- If both the measurements do not fall in one particular size - use the larger of the two measures to choose the jacket size.

- If the two measurements are on the border line between two sizes, choose the one that offers a preferred fit i.e. sporty fit (lower size) or comfort fit (higher size) depending on your preference.

Remember, each brand has its own body size charts, so do check the chart before you select the size. If you have any further queries or need clarifications, please write to us on info@viaterragear.com

Here are a few tips on how to check the fitment of the warm jacket:

• Please ensure the warm jacket feels comfortable and not too tight or too loose. You can check this by wearing the Frost and stretching your arms out in the riding position to confirm there is no noticeable pulling at the shoulders and the torso area.
• Make sure the jacket is the right length for your body. It should be long enough to cover your hips and prevent drafts from entering, but not so long that it bunches up or gets caught in the seat.
• Make sure the shoulders of the jacket fit well and don't feel too tight or too loose. They should not ride up when you raise your arms.
• Make sure all zippers and closures function properly and don't feel too tight or too loose.

Please write to us on info@viaterragear.com if you have any further queries or need clarifications.

RISK FREE RETURNS

Concerned that you might not like what you get? While we are extremely confident that you will be more than satisfied with our riding pants, we understand that sometimes you might be looking for something different. Not to worry, we offer a zero risk trial within 3 days from the date of delivery. And no, you don't need to pay for the return shipping. Please write to us on info@viaterragear.com if you have any further queries or need clarifications.

FREE SIZE EXCHANGE

Worried about the wrong size if you buy online? You can exchange for size within 3 days from the date of delivery at ZERO cost – yup, we will get the riding pants picked up from your address and send a replacement once we receive them in an unused condition. Please write to us on info@viaterragear.com if you have any further queries or need clarifications.

3M Thinsulate:  Lightweight, compressible, breathable and specially designed to trap heat

Elasticated cuffs and hem: The Frost jacket is designed with stretchy cuffs and hem that keep the jacket in place when worn under a riding jacket. But most importantly retains the body heat inside the jacket.

Pre-curved arms & stretch panels: Designed for long periods of motorcycle travel

YKK Vislon auto-lock zippers & pullers: To ensure safety and ease of use

Zipper Garage: The zipper garage feature of the Frost jacket prevents discomfort or chafing on the chin while wearing it.

CLEAN & CARE:

• For dirt and stains, wipe clean with a damp cloth and lukewarm water (DO NOT USE HOT WATER)
• DO NOT allow your warm wear to come in contact with solvents (do not use fabric softener!), fuel, or cleaning agents.
• DO NOT use any kind of CHEMICAL or ALCOHOL-BASED product.
• Do not place your warmwear near, or come in contact with a direct heat source
• Dry the warmwear on a hanger away from direct sunlight where there is good ventilation.
• Zippers need to be cleaned and lubricated regularly - you can use vaseline or candle wax

STORAGE:

• Make sure your warm wear is completely dry before you store it.
• If stored wet or in a non-ventilated area as it allows mildew to grow on the fabric causing discoloration and damage.
• Hang the warm wear on a hanger or fold it neatly and lay it flat.
• Regularly check the warm wear for any signs of mildew or mold, and clean it immediately if necessary.

Warranty

We provide a 6 months warranty against defects in materials or craftsmanship if purchased directly from us or from an authorized dealer. Please click on Warranty policy and choose the relevant category for further details.

Lifetime repair support

Fabrics fade, zippers get stuck, plastic fittings break – a few things that could happen with usage. We believe in extending the life of our products so that we use lesser natural resources and you get more bang for your buck. Please write to us on salesteam@viaterra.in if you require any help with repairs or have any questions!