Quick Links
PRODUCT HIGHLIGHTS
×
100% Cordura shell
The Munro motorcycle riding pants is crafted from specially woven Cordura fabric, known for its exceptional durability and abrasion resistance. Unlike traditional polyester fabrics commonly found in motorcycle jackets, the Cordura nylon shell offers superior protection against UV degradation, ensuring your jacket maintains its integrity even after prolonged exposure to the sun. This fabric is also highly resistant to abrasions and tears, making it the perfect choice for the demanding conditions of motorcycle riding.
×
Ergonomics designed for riding position
The Munro motorcycle riding pants are designed with the same ergonomic focus as the jacket, to provide a comfortable and reliable fit while riding. The pants feature a seamless stretch panel at the crotch area and the rear yoke, which helps to remove pressure points while sitting on the bike and allows for more room to stretch when getting on and off the bike. The stretch inner lining complements this feature, working together to provide a comfortable and secure fit.
×
SAS-TEC CE Level 2 Armours with maximum coverage
The Munro motorcycle pants are equipped with state-of-the-art SAS-TEC Level 2 visco-elastic armors, providing superior comfort and maximum coverage. While exceeding CE Level 2 standards, these armors are lightweight, ensuring they're almost unnoticeable once worn, reducing pressure points on joints and minimizing fatigue on longer rides. The Sas-Tec armors are also highly flexible, allowing for a wide range of motion and providing enhanced protection without sacrificing comfort.
×
ViaTerra's proprietary FocusFit - Built for the ride
The Munro motorcycle pants are designed with a pre-curved knee design to ensure the armor is positioned properly and doesn't bulge when the knee is bent. This design also helps to prevent the pants from riding up while sitting on the bike. The pants also feature accordion panels at the knees, which offer additional stretch and comfort, allowing for a greater range of motion while riding.
×
Superior armour coverage and optimum positioning
The Munro motorcycle pants are equipped with Type B armors chosen to maximize coverage. These armors in combination with the cinch straps, help to keep the armor in the right place, preventing it from shifting or moving out of position while riding, providing maximum protection at all times.
×
CrossFlowTech for maximum ventilation
Keeping in mind the typical Indian conditions of hot, humid weather, the Munro design features strategically positioned mesh panels that provide excellent cross ventilation. This allows for maximum airflow including at the inner pockets, keeping the rider cool & comfortable even on the hottest of days.
×
Best in class coverage with 180° pant connector
The Munro motorcycle pants offers best in class coverage with the widest zipper connection for the jacket and pants. This feature is critical for providing additional protection for the lumbar region, as the connector prevents the jacket from riding up and exposing the lower back in a crash, providing an extra layer of protection for this vulnerable area.
×
Easy zip with flexible over/ in the boot
Designed with a knee-length long zipper, they offer easy on and off, while the adjustable lower allows you to wear them inside or outside of your boots.
×
Adjustable belt & secure buckle closure
The Munro riding pants come with a Duraflex quick snap buckle for a secure closure. The easy-to-operate snap design ensures a snug fit, lasting longer than traditional velcro or button closures.
×
SuperGrip Panels
Designed with strategically placed panels on the knee and seat, they provide added grip and control on the bike, reducing the risk of slips and ensuring a more secure ride.
×
Easy to access pockets
The pockets on the pants are designed so they are easily accessible while seated on the bike.
×
Enhanced visibility with well placed reflectives
Strategically placed reflectives to provide enhanced visibility during night rides while balancing aesthetics for day rides
×
×
PRODUCT SPECIFICATIONS
1) Once you place your order for the Munro, our team will reach out to you to schedule a video call for the step-by-step measurement process.
To ensure that the measurements are taken correctly during the call, here are a few things to keep in mind:
- Make sure to use a flexible tape measure, like a tailor's tape, to take the measurements.
- All measurements must be taken in the same units, whether it's centimeters or inches.
- It is recommended to wear base layers while taking the measurements, to get the most accurate fit.
- Avoid wearing anything bulky or thick, as this will affect the final measurements.
- If possible, please have a family member or a friend assist you with taking the measurements.
2) We will use your measurements to tailor the component panels as per your physical attributes
3) We will share the final configuration including color & armour selection for your approval.
4) Post approval, the production process will begin and we will share the expected ship date.
Please write to us on info@viaterragear.com if you have any further queries or need clarifications.
Why SAS-TEC CE Level 2 Armour?
- Made from Viscoelastic Foam with Memory effect i.e. after an impact or any kind of deformation the foam (protector) returns to its original shape quickly
- Multi Impact Complaint - Unlike many other dampening materials (such as styrofoam (EPS), silicone or foam of inferior quality), SAS-TEC armours are multi impact compliant. So protectors keep full functional capability even when the same area is affected repeatedly with high pressure or impact.
- Excellent Residual Forces - The CE-approved protectors of SAS-TEC remain up to 50 per cent below the legal values of the norm EN 1621.
- Lightweight - Hard shell protectors or materials containing silicone are considerably more heavy which reduces the wearing comfort. The density of our SAS-TEC foam is about 280 g/l, hard shells in contrast have an average density of 1050 g/l.
- Adaptive Absorption - The air which is embedded in the protector cells provoke a progressive absorption i.e. remains soft in case of slowly increasing forces, however when it comes to a fast heavy impact the resistance of the foam grows with increasing speed.
- Quick Impulse response - Contrary to hard shell protectors, styrofoam damper or many other dampening materials, SAS-TEC visco-elastic foam reacts promptly and without any time delay even to minor impacts. The energy absorption goes almost linear, which keeps the impact forces to the human body at a low level.
- Long product life - Some manufacturers of body protection only indicate a product life of two to three years for their articles, whereas SAS-TEC armour comes with a life expectancy of ten years.
- Hand washable - The cell structure of SAS-TEC visco-elastic material keeps water from entering i.e. the water absorption is below one per cent. Therefore the protectors can be hand washed without any issues.
Munro custom riding pants is tailor made to your measurements and is not returnable or refundable.
IMPORTANT NOTE:
Body armours/ protectors must always be removed before starting the washing process
CLEAN & CARE:
- For dirt and stains, clean with a soft-bristled brush and lukewarm water (DO NOT USE HOT WATER)
- DO NOT allow your jacket to come in contact with solvents (do not use fabric softener!), fuel, or cleaning agents.
- DO NOT use any kind of CHEMICAL or ALCOHOL-BASED product. For longer life of the fabric, we recommend hand washing the jacket using mild detergent
- Do not place your jacket near, or come in contact with a direct heat source
- Dry the jacket on a hanger away from direct sunlight where there is good ventilation.
- Zippers need to be cleaned and lubricated regularly - you can use vaseline or candle wax
STORAGE:
- Make sure your riding pants are completely dry before you store it on a hanger.
- If stored wet or in a non-ventilated area as it allows mildew to grow on the fabric causing discoloration and damage
- Do not store the riding pants in air-tight plastic bags
Warranty
We provide a 12 months warranty against defects in materials or craftsmanship if purchased directly from us or from an authorized dealer. Please click on Warranty policy and choose the relevant category for further details.
Lifetime repair support
Fabrics fade, zippers get stuck, plastic fittings break – a few things that could happen with usage. We believe in extending the life of our products so that we use lesser natural resources and you get more bang for your buck. Please write to us on salesteam@viaterra.in if you require any help with repairs or have any questions!
Product name: Munro Tailor Made - Street Mesh Motorcycle Riding Pants
Name of the commodity: Motorcycle Apparel
Manufactured/Imported By: ViaTerra Travel Gear Pvt Ltd, OS-2, Opp H-18, MIDC Satpur, Nashik 422007
Country of Origin: India
Price, wherever mentioned, is MRP and inclusive of all taxes
Customer Support
For customer complaints and support, email or call us:
- Customer Care Contact: 0253 2996744
- Email Id: contactus@viaterragear.com
REVIEWS
Customer Reviews
Based on 14 reviews
79%
(11)
14%
(2)
0%
(0)
0%
(0)
7%
(1)
A
Viaterra’s Custom-built Munro motorcycle pants offer the perfect blend of safety, comfort, and style. Tailored to your exact measurements(all done from home, where in we send in a list of measurements to them, & this gets explained really well in a video that they share with us), they ensure a snug yet flexible fit, eliminating discomfort during long rides. Made with premium materials , they provide excellent abrasion resistance and durability. Features such as built-in Armour and ventilation panels add to their functionality, the personalized fit and added protection make them a worthwhile investment. Overall, these pants elevate your riding experience with unmatched quality and customization.
K
I recently purchased a custom riding pants from Viaterra
Quality 5/5
Design 5/5
Fit 5/5
V
I waited until I rode 5k+ km to write a review to understand the product better. This is a comfortable pair of riding pants. The usage of SAS-TEC armour inserts adds to that comfort factor. Using Cordura in the high abrasion zones will probably get these an "AA" rating if CE tested. The usage of mesh and elastic material in appropriate zones makes it the perfect balance of comfort and protection. But they dropped the ball in three places.
1. The part above the knee was incorrectly sized and cut, resulting in excess material above the accordion stretch panels. This makes it look slightly weird but doesn't affect functionality or comfort.
2. The Velcro placement and usage have to be improved a lot. The girth adjustment for the boot part uses a regular 1-inch velcro with minimal bonding area. The hook and loop parts are stitched perpendicular, so the bonding patches are only one square inch each. This means the hold is very weak, and that part comes apart with minimal force. Also, the dirt flap over the zippers has velcro patches to affix them, but the positioning and quantity of Velcro are so bad that it looks ugly.
3. This is a serious oversight. They should have used auto-locking zippers for the fly. That is just common sense. What made Viaterra use normal zippers for the fly of these pants? They frequently slide down when we move around on our motorcycles.
To summarize, the otherwise excellent riding pants are marred by the improper use of Velcro and a nonsensical oversight. Other usability improvements like deepening the thigh pockets to fit larger mobile phones, a ring/loop for hanging key chains, a better nylon belt and a more robust buckle could elevate the quality further.
A
I ordered this relatively expensive piece of riding gear and received something different to what is portrayed (different is specs easily seen). Called up you guys to find out that the rep who dealt with me is gone and your new guys couldn’t care less. I will be leaving the same feedback about your products on all my biking and social forums
Hi Advitya,
Thank you for reaching out. The Munro Street Mesh Riding Jacket is a product that is continually evolving as we refine its design and features to meet the needs of riders. We frequently update our gear to incorporate the latest materials, technologies, and rider feedback, ensuring improved comfort and protection with each iteration. Your input is valuable & we've taken note of your feedback.
Regards,
ViaTerra
f
bit baggy behind the thigh for my liking and the velcros in the bottom is to much work to wear and come out of. A easy wearing would be appreciated.
You may also like
WORLDWIDE DELIVERY
Not just India, we ship our products across the world!
MADE IN INDIA
Proudly designed and manufactured in India and loved across the globe!
VIATERRA ASSURED
Lifetime repair service on all products we manufacture in house.