Quick Links
×
100% Cordura shell
The Munro motorcycle riding jacket is crafted from specially woven Cordura fabric, known for its exceptional durability and abrasion resistance. Unlike traditional polyester fabrics commonly found in motorcycle jackets, the Cordura nylon shell offers superior protection against UV degradation, ensuring your jacket maintains its integrity even after prolonged exposure to the sun. This fabric is also highly resistant to abrasions and tears, making it the perfect choice for the demanding conditions of motorcycle riding.
×
Ergonomics designed for riding position
Unlike other jackets that may fit well while standing in a store, the Munro is designed to work best when you're on your motorcycle. The jacket's ergonomic cut and pre-curved sleeves conform to the rider's body while in a riding position, providing an unparalleled level of comfort and flexibility. This innovative design reduces fatigue and discomfort during long rides, allowing you to focus on the road ahead.
×
SAS-TEC CE Level 2 Armours with maximum coverage
The Munro motorcycle jacket is equipped with state-of-the-art SAS-TEC Level 2 visco-elastic armors, providing superior comfort and maximum coverage. While exceeding CE Level 2 standards, these armors are lightweight, ensuring they're almost unnoticeable once worn, reducing pressure points on joints and minimizing fatigue on longer rides. The Sas-Tec armors are also highly flexible, allowing for a wide range of motion and providing enhanced protection without sacrificing comfort.
×
ViaTerra's proprietary FocusFit - Built for the ride
The jacket features a unique short front-drop tail combo, providing an optimal fit while riding, reducing bunching-up in the front while enhancing coverage for the back. This design keeps the jacket in place while riding and ensures that the armors always stay in the correct position.
×
Optimal armour position that stays in place
The Munro motorcycle jacket has undergone extensive research and development to ensure the positioning of the armor is optimal for protection. The chest armor has been engineered to sit as close to each other as possible, with a central placement compared to other jackets on the market. This unique design helps to distribute the impact force evenly across the chest, providing enhanced protection in the event of a fall or accident.
×
CrossFlowTech for maximum ventilation
Keeping in mind the typical Indian conditions of hot, humid weather, the Munro design features strategically positioned mesh panels that provide excellent cross ventilation. This allows for maximum airflow including at the inner pockets, keeping the rider cool & comfortable even on the hottest of days.
×
Best in class coverage with 180 pant connector
The Munro motorcycle jacket offers best in class coverage with the widest zipper connection for the jacket and pants. This feature is critical for providing additional protection for the lumbar region, as the connector prevents the jacket from riding up and exposing the lower back in a crash, providing an extra layer of protection for this vulnerable area.
×
100% Waterproof mobile pocket
The Munro motorcycle jacket includes a 100% waterproof pocket designed to protect your mobile phone from the elements, ensuring that it stays dry even in heavy rain. The pocket is placed in a convenient location and easily accessible, so you don't have to stop and dig through your jacket to find your phone.
×
Zip cover for tank protection
Features a thoughtfully placed zip cover to prevent scratches on the motorcycle's paintwork caused by the zipper, a common issue for many riders.
×
The Munro motorcycle jacket design has an unconventional pocket placement that makes them easily accessible while seated on the bike. The jacket's smartly placed waterproof pocket on the left arm, in particular, helps to keep cash or credit card handy for fuel stops. This unique design feature eliminates the need for the rider to dismount and open the jacket pockets, saving time and effort during the ride.
×
Enhanced visibility with well placed reflectives
The reflectives are placed in key areas such as the chest, arms and back, providing maximum visibility to other road users during low light conditions. These reflectives are discreetly integrated into the design of the jacket, ensuring that they don't detract from the overall aesthetic of the jacket during daylight hours.
×
Original YKK™ zips for extra durability and smooth operation
Munro uses the world class YKK zippers & pullers THROUGHOUT.
×
At all stress points for extra reinforcement
PRODUCT SPECIFICATIONS
1) Once you place your order for the Munro, our team will reach out to you to schedule a video call for the step-by-step measurement process.
To ensure that the measurements are taken correctly during the call, here are a few things to keep in mind:
- Make sure to use a flexible tape measure, like a tailor's tape, to take the measurements.
- All measurements must be taken in the same units, whether it's centimeters or inches.
- It is recommended to wear base layers while taking the measurements, to get the most accurate fit.
- Avoid wearing anything bulky or thick, as this will affect the final measurements.
- If possible, please have a family member or a friend assist you with taking the measurements.
2) We will use your measurements to tailor the component panels as per your physical attributes
3) We will share the final configuration including color & armour selection for your approval.
4) Post approval, the production process will begin and we will share the expected ship date.
Please write to us on info@viaterragear.com if you have any further queries or need clarifications.
Why SAS-TEC CE Level 2 Armour?
- Made from Viscoelastic Foam with Memory effect i.e. after an impact or any kind of deformation the foam (protector) returns to its original shape quickly
- Multi Impact Complaint - Unlike many other dampening materials (such as styrofoam (EPS), silicone or foam of inferior quality), SAS-TEC armours are multi impact compliant. So protectors keep full functional capability even when the same area is affected repeatedly with high pressure or impact.
- Excellent Residual Forces - The CE-approved protectors of SAS-TEC remain up to 50 per cent below the legal values of the norm EN 1621.
- Lightweight - Hard shell protectors or materials containing silicone are considerably more heavy which reduces the wearing comfort. The density of our SAS-TEC foam is about 280 g/l, hard shells in contrast have an average density of 1050 g/l.
- Adaptive Absorption - The air which is embedded in the protector cells provoke a progressive absorption i.e. remains soft in case of slowly increasing forces, however when it comes to a fast heavy impact the resistance of the foam grows with increasing speed.
- Quick Impulse response - Contrary to hard shell protectors, styrofoam damper or many other dampening materials, SAS-TEC visco-elastic foam reacts promptly and without any time delay even to minor impacts. The energy absorption goes almost linear, which keeps the impact forces to the human body at a low level.
- Long product life - Some manufacturers of body protection only indicate a product life of two to three years for their articles, whereas SAS-TEC armour comes with a life expectancy of ten years.
Munro custom riding jacket is tailor made to your measurements and is not returnable or refundable.
IMPORTANT NOTE:
Body armours/ protectors must always be removed before starting the washing process
CLEAN & CARE:
For dirt and stains, clean with a soft-bristled brush and lukewarm water (DO NOT USE HOT WATER)
DO NOT allow your jacket to come in contact with solvents (do not use fabric softener!), fuel, or cleaning agents.
DO NOT use any kind of CHEMICAL or ALCOHOL-BASED product. For longer life of the fabric, we recommend hand washing the jacket using mild detergent
Do not place your jacket near, or come in contact with a direct heat source
Dry the jacket on a hanger away from direct sunlight where there is good ventilation.
Zippers need to be cleaned and lubricated regularly - you can use vaseline or candle wax
STORAGE:
Make sure your jacket is completely dry before you store it on a hanger.
If stored wet or in a non-ventilated area as it allows mildew to grow on the fabric causing discoloration and damage
Do not store the jacket in air-tight plastic bags
Warranty
We provide a 12 months warranty against defects in materials or craftsmanship if purchased directly from us or from an authorized dealer. Please click on Warranty policy and choose the relevant category for further details.
Lifetime repair support
Fabrics fade, zippers get stuck, plastic fittings break – a few things that could happen with usage. We believe in extending the life of our products so that we use lesser natural resources and you get more bang for your buck. Please write to us on salesteam@viaterra.in if you require any help with repairs or have any questions!
Product name: Munro Tailor Made - Street Mesh Motorcycle Riding Jacket
Name of the commodity: Motorcycle Apparel
Manufactured/Imported By: ViaTerra Travel Gear Pvt Ltd, OS-2, Opp H-18, MIDC Satpur, Nashik 422007
Country of Origin: India
Price, wherever mentioned, is MRP and inclusive of all taxes.
Customer Support
For customer complaints and support, email or call us:
- Customer Care Contact: 0253 2996744
- Email Id: contactus@viaterragear.com
REVIEWS
Customer Reviews
Based on 20 reviews
90%
(18)
5%
(1)
0%
(0)
0%
(0)
5%
(1)
K
I recently purchased a custom riding jacket from Viaterra
Quality 5/5
Design 5/5
Fit 5/5
v
I recently purchased a custom riding jacket from Viaterra, and I couldn't be happier with my purchase!
**Quality (5/5):**
The quality of this jacket is outstanding. From the robust materials to the impeccable craftsmanship, it's evident that Viaterra takes pride in delivering top-notch gear. The jacket feels durable and ready to withstand the challenges of the road.
**Fit (5/5):**
Getting the right fit in a riding jacket is crucial, and Viaterra nailed it. The jacket fits like a glove, providing both comfort and confidence during my rides. It's clear that they pay attention to the details to ensure a perfect fit.
**Design (5/5):**
The design of the jacket is well-thought-out. Every feature seems to serve a purpose, whether it's for functionality or style. I appreciate the attention to detail in the design, making it not only a practical piece but also a stylish one.
**Overall Experience (5/5):**
My experience with Viaterra has been fantastic. From the customization options to the excellent customer service, they've exceeded my expectations. The jacket arrived promptly, and it's evident that they care about delivering a premium product.
I highly recommend Viaterra for anyone in search of quality riding gear. This custom jacket has become an essential part of my riding gear collection, and I look forward to future purchases from this exceptional brand.
Happy riding!
N
Looked for many options and brands in various stores. It was from a travel enthusiast, I discovered this brand and tried our Spencer at a store. When I could get Munro tailor fit and more designs I went with this. Lighter than Reynox jacket, fits better than many other brands out there at affordable price.
S
Really liked the design of the jacket and fit of it. I have purchased mainly because of design than customised fit as I fit into standard sizes. Fit and finish of the product is top notch. I liked fit of jacket than trousers. My only suggestion are :
1. Kindly put current version of jacket ( which lacks graphics of previous version), trousers ( which lacks tank grip patches) in your website display pictures
2. It would have been great help if u make tie up with local tailors so that we can get right measurement. ( my friend always used to get varied values when he measured the requirements measurement twice 😅)
3. Provide the standard size option also so as we can get orders fast and with reduced price , as every one doesn’t require tailored fit
I own DSG race pro v2 and alpine star solano and still felt this is more nicer in quality of products used and minor details
H
Hi friends,
Being my first jacket. I have looked into several other products, tried on. But I purchased this product in 2019 due to following reasons-
1. Tailored to fit individuals
2. Made in India
3. High quality materials
4. The features mentioned are 100%
5. The protectors are better ceritifed
Writing this review in 2023 with absolute satisfaction.
All features are notable on use and shows the ease a jacket can provide. The protectors are well placed. Materials construction, fit are the most favorite. Useable pockets. Breathability good on summer days too. Easy to maintain.
Customer service:
Mr. Ajinkya.
Was guided perfectly to get perfect fit. They make video calls to measure. Also send trial wear before confirming the final design.
WORLDWIDE DELIVERY
Not just India, we ship our products across the world!
MADE IN INDIA
Proudly designed and manufactured in India and loved across the globe!
VIATERRA ASSURED
Lifetime repair service on all products we manufacture in house.
